Important Bike Maintenance Tips During the Coronavirus Pandemic

putri titian

Consumer Reports has no financial relationship with advertisers on this site. Many people are looking for alternative ways to exercise during the coronavirus pandemic, especially because self-isolation means hitting the gym is often no longer an option. This is driving people and families to break out the old bicycle from […]

Consumer Reports has no financial relationship with advertisers on this site.

Many people are looking for alternative ways to exercise during the coronavirus pandemic, especially because self-isolation means hitting the gym is often no longer an option. This is driving people and families to break out the old bicycle from temporary storage—cycling is a great way to exercise in solitude. Others might turn to riding their bicycle for commuting or running errands to avoid public transportation.

While cycling is a great solution for all these situations, it’s important to make sure your old steed is mechanically safe before you take it out on the road or local bike trails. This is especially critical if you’re hopping onto a bicycle that has been sitting unused in the garage or basement for a couple of years or longer.

Like most mechanical devices, bicycles need care and maintenance to work properly. “There is more involved in going for a bike ride than just pulling the bike down from the garage rafters and putting some air in the tires,” says Jake Fisher, who is not only the director of auto testing at Consumer Reports but also an avid triathlete and cyclist. “Riding an improperly maintained bicycle can end up as a miserable adventure at best, and at worst it can be dangerous for you and others out on the road,” he says.

Bicycle shops have been declared essential services in several regions, with many remaining open to handle service and repair work. Special social distancing protocols have been put in place, such as curbside bicycle drop-off and pickup, to keep everyone safe. So even if your old bike is looking a little worn out or rough around the edges, there are options to get it spruced up and in fine running condition.

“We no longer allow customers into our stores anymore,” says Gary Nicol, co-owner of Pedal Power bike shops, based in Connecticut. Instead, customers call the shop when they arrive, leave their bike outside, and talk on the phone with a service technician later about what work needs to be done.

“We’re slammed with service and repairs right now,” Nicol says. “It’s not just the sheer volume of work, but also that our staff is down between 50 to 75 percent across our stores; many of our employees have chosen not to work for health precautions.” 

Although new-bike sales are way down, he says that the typical spring bike tuneups, along with people looking for alternative ways of exercising, have caused an onslaught of folks bringing in bicycles. “It seems like everyone is out riding,” he told CR. “Our local rail trail is filled with bicycles right now like I have never seen before—it’s like a superhighway out there.” To that end, it’s best to seek out roads with little car traffic to minimize your chance of being involved in a crash, as well as bike trails that have few users on them to maintain social distancing during the coronavirus pandemic.  

If your bicycle has something broken or malfunctioning, call your local bike shop and make an appointment for a service drop-off. But if your previously stored bicycle doesn’t have anything mechanically wrong with it, there are some easy precautionary steps you can take to make sure it is safe to ride—best of all, these tasks require almost no mechanical skills or special tools.

5 Preride Bicycle Maintenance Tips

  • Air in the tires: Bicycle tires naturally lose air over time—your tires are likely to be completely flat if the bike hasn’t been ridden in a year or longer. Inflate the tires within the range listed on the tire’s sidewall. Nicol says to put air in slowly, checking to make sure the bead of the tire (the sidewall) stays properly “seated” inside the rim of the wheel. “Airing the tire up too quickly, or if the tire isn’t properly seated onto the rim, can cause the tube to burst as you’re pumping air in,” Nicol says. Be prepared to add a small amount of air to the tires every few days because air naturally will leak, or escape, through pores in the tubes.

  • Give the tires a visual inspection: Once you inflate the tubes, look the tires over thoroughly for cracking or dry rot. Nicol says it’s easy for a tire to get dry rot with age, especially the part of the tire that has been sitting for a couple of years on a concrete floor.

  • Secure the quick-release wheel skewers: Many bicycle wheels use quick-release skewers to attach the wheel to the bicycle, which makes it easy to take the wheel off without using tools. But Nicol says he sees many bicycles come into the shop with the skewers on wrong. “The skewers indicate on them which position is ‘open’ and which is ‘closed,’ but often people don’t have them locked properly,” he says. This can be dangerous because the wheel could come loose while riding. And yes, when riding you want them clamped into the position where the word “closed” can be read.

  • Brake check: Inspect the front and rear brake assemblies to make sure they are working properly. The left and right brake pads on each wheel should come into contact with the rim of the wheel when you pull back on the brake levers. “Make sure there is strong braking force before the point where the brake lever comes in contact with the handlebar,” Nicol says. If it doesn’t, it needs to be adjusted so that you can get full stopping power in the case of an emergency maneuver.   

  • Lubricate the chain: Your chain really is the “link” that makes your bike’s drivetrain function, so it’s important to keep it properly lubricated and free of gunk, grime, and dirt. It’s best to use bicycle-specific chain lube, but Nicol says multipurpose lubes—such as 3-in-One oil and WD-40—are better than nothing at all. Apply only a thin coat of lube, as an excessive amount will attract dirt onto the chain as you ride. Shift the bike through all its gears, then wipe the chain down with a rag. “Wiping the chain down before adding lube will accomplish almost nothing if the chain is completely gummed up with old crud,” Nicol says.

Before You Ride

After your bike is set, don’t forget to grab your helmet. Keep in mind that bike helmets don’t last forever, though. CR’s bike helmet testing experts say the protective foam liner can deteriorate in just a few years, which means it might not provide sufficient protection in an impact or a crash.

Be sure to check out CR’s bike helmet ratings to find out which helmets provide the best protection, ventilation, fit adjustments, and ease of use.

Just to be on the safe side, CR’s Fisher also recommends taking a spare tire tube and small plastic tire tools in case you get a flat (make sure you know how to change it—there are plenty of how-to videos online), along with a mini-pump or a CO2 cartridge and inflator to add air. And take that cell phone in case of an emergency.

More from Consumer Reports:
Top pick tires for 2016
Best used cars for $25,000 and less
7 best mattresses for couples

Consumer Reports is an independent, nonprofit organization that works side by side with consumers to create a fairer, safer, and healthier world. CR does not endorse products or services, and does not accept advertising. Copyright © 2020, Consumer Reports, Inc.

Source Article

Next Post

Old Republic Insured Automotive Services Review (2020)

Service contracts from Old Republic Insured Automotive Services cover repairs to new and pre-owned vehicles. Advertiser Disclosure Many Americans don’t have enough money in an emergency fund to cover an unanticipated expense, such as a car repair. Since modern vehicles use sophisticated technology and many people hold onto their cars […]